In this briconsejo we will learn how to upholster a rotating chair, a restore job very helpful in giving a new look to our rotating chair forever. Work will begin releasing the support that we will upholster. We use a screwdriver to introduce between the upholstery and the plastic structure, pushing hard. Then we separate the seat also the metal base, removing the connecting screws. If the original upholstery rotating chair is not deteriorated we not retire because it will reinforce us.
We are introducing the new fabric provisionally holding it with pins, modifying their position until finally tighten the fabric. To strengthen the fabric we will replace the pins by staples. Initially place a nip on each side to work without danger that the fabric is released. Then we cut the excess around the perimeter to prevent unsightly bulges.
12 Photos Gallery of: Upholstered Rotating Chair
Carefully let go staples holding the auction lining because it will be used, and proceed to upholstery in the same way as the backup. Finally, we look back lining. We have two upholstered pieces, so we can only unite again to the structure of the rotating chair. Will put pressure supported by the plastic part, we screw the height adjuster and check that it is securely seated.