Replacing the Gas Cylinder Chair Office Outlet

Jun 27th

The cylinder of gas in a chair office outlet works as a booster to adjust the height of the chair and keep at the level selected spring. Typically, gas cylinders are the first components that wear on a chair. In many cases it costs less to replace furniture repair of office, so that few companies choose to pay a repair. Use protection for your eyes. The parts of the chair can be expelled during removal and may pressurized gas cylinder is drilled and cast a cloud of gas.

Premium Chair Office Outlet
Premium Chair Office Outlet

Remove the base of the chair office outlet. Place newspaper on 0.2 meters square floor. Supports the saddle on the back edge of the seat base protruding on newspapers. Locate the pin at the bottom of the central base, where the pole is attached to the chair. Slide the screwdriver blade under the upper part of the clasp. Turn the screwdriver to pry open the clasp and then push the curved portion until you can remove it from your site.

12 Photos Gallery of: Replacing the Gas Cylinder Chair Office Outlet

Image of: Premium Chair Office Outlet
Image of: Dark Chair Office Outlet
Image of: Elegant Chair Office Outlet
Image of: Desk Chair Office Outlet
Image of: Guest Chair Office Outlet
Image of: Chair Office Outlet With Titanium
Image of: Yellow Chair Office Outlet
Image of: Modern Chair Office Outlet
Image of: Chair Office Outlet Furniture
Image of: Chair Office Outlet Warehouse
Image of: Nice Chair Office Outlet
Image of: Chair Office Outlet Branded
 

Washer strip and remove base for chair office outlet. Remove the bearings and the two washers located in the rubber stopper. You lever gently to remove the parts of the piston rod gas cylinder using the screwdriver blade if not fall by them.