The covers for the backs of the foldable high chair without seams are easy to make. This project requires simple measurement, cutting and ironing, and takes no more than 15 minutes to complete. The case finished adds a touch of elegance, either to fill a room full of chairs for a special occasion or just a chair. Put the chair folded a piece of cardboard and tracing around the back, starting just above the seat. Draw another line in the carton an inch (2.5 cm) outside the first. Walking around this line to make a design.
Cut two pieces of fabric using the cardboard model. Put the pieces of fabric on your ironing board with right sides together. Together the pieces of fabric using fusible membrane 3/8 inch (9 mm) around the outer edges of foldable high chair. Cut corners to cut half the space for sewing. This will help prevent the seams open.
11 Photos Gallery of: Foldable High Chair
Press less than 1/4 inch (6 mm) at the lower edge, then press less than 3/8 inch (9 mm). Melt the hem using tape fuse membrane. Turn the cover to the right left out. Make a loop with a satin ribbon in a color to match that of your fabric with foldable high chair.