Chair rail designs – Is chair rail molding a piece horizontally installed on a wall about one third to half the height from the ground. The original intention of the chair rail was to avoid the back of the chairs of damaging the wall, but is now considered more decorative. Although chair rails are typically installed using nails, you can glue them to the wall with adhesive nails from metal instead of wooden poles. The installation process simply requires some additional cleaning steps to create a professional look.
Slide a straight-backed chair rail designs (like a dining chair) against the wall and measure where the top of the chair and the wall. This is the height where the chair rail, which usually falls around 34 inches tall, is installed. Walk to one end of the wall and measure the desired height, marking it with a pencil. Walk to the other end of the wall and do the same.
12 Photos Gallery of: Chair Rail Designs with Nails
Stretch a chalk line between the two pencil marks with the help of an assistant. Place a level on top to make sure it is even and then snaps the line against the wall to designate the height of the chair rail designs.Tags : chair molding ideas, chair rail designs, chair railing designs